Part Number Hot Search : 
C2500 BC33840 1N6519 90SQ035 SM8002C KN3903 FIN1104 D2C0111N
Product Description
Full Text Search
 

To Download CHV2710-QJ Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 2.5 GHz InGaP HBT 5W Linear Power Amplifier
May 2006 - Rev 24-May-06
Features
CHV2710-QJ Functional Block Diagram
Vcntrl RF out
Internal Pre-matching Single Supply operation Power Gain - 9.5dB Intermodulation Distortion - -30dBc @ 34dBm per tone ESD Protection on board Current Control for multiple applications 2.5% EVM @ 30dBm avg power, 802.16 OFDM signal format, PAR=9.5dB Plastic Surface mount packaging Low Thermal Resistance Ideal for WiMAX applications Lead Free and RoHS compliant 6x6 QFN package Evaluation Boards Available
Bias Circuit RF in Output Match
Input Match
CHV2710
* Backside of Package is emitter gnded
General Description
The CHV2710 internally pre-matched power HBT device provides 9.5dB of gain, 2.5% EVM at 30dBm output power for 802.16 OFDM signal with a peak to average power ratio of 9.5dB. The device operates off a single supply voltage up to 12V and includes internal bias circuitry to enable exact setting of the quiescent current using an external Vcontrol. This Vcontrol is non-unique voltage setting and the same value can be used for each part depending on the required Icq. The device is ideal for high linearity, high data rate applications such as WiMAX. Internal pre-matching facilitates a simplified external matching approach and the highest in-band gain potential of the device. The device operates with unique matching at each of the popular WiMAX bands with the inherent repeatability of an InGaP HBT process.
Absolute Maximum Ratings
PARAMETER MIN
RATING MAX
Voltage supply (Vcc) Current (Icc) Dissipated power (Pdiss) Input power (Pin) Storage temperature (Tstg) Channel tem perature (Tch) Operating backside temperature (Tb)
2
4.5 V -60 C -40 C
12 V 2000 mA 18 W 30 dBm 150 C 175 C ( 3)
( ) Operation outside any of these limits can cause permanent damage. ( 3) C alculate maximum operating temperature Tmax using the following formula:
Tmax=175-(Pdiss [W] x 5) [C].
Room temperature.Typical bias conditions:Vcc=12V.Typical assembly.(1)
PARAMETER
Operating frequency band Quiescent current (depends on Vcc) Power gain at 30 dBm power Collector Current at 30 dBm
SYMBOL
F Icq Gps Icc
MIN
TYP
2.5 730 11 775 -31 -41
MAX
UNITS
GHz
760
mA dB
800 -30 -40 -10.0
mA dBc dBc dB dBm
Output third order distortion point at 34dBm per IMD tone power, f1=2650 MHz, f2=2650.1MHz Output third order distortion point at 30dBm per IMD tone power, f1=2650 MHz, f2=2650.1MHz Input reflection coefficient at 2700 MHz Pout with 2.5% EVM under 802.16d OFDM signal format with PAR = 9.5dB Thermal resistance Noise figure at 2.65GHz
1
IRL Po_2.5%E VM_9.5 Rth NF
29.0 -
-16.0 30.0 4.5
5 -
C/W dB
( ) Data measured in a C eleritek matched connectorized fixture.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
2.5 GHz InGaP HBT 5W Linear Power Amplifier
May 2006 - Rev 24-May-06
CHV2710-QJ
Typical Performance: (Vcc = 12V, Vcontrol = 8V, Icc = 736mA)
EVM Vs Pout Vs Frequency
4.5 4 3.5 3
EVM vs Pout vs Temp
4
3.5
3
2.5
EVM (%)
EVM (%)
2.5 2 1.5 1 0.5 0 10 11 12
25 C 2.7 GHz 25 C 2.6 GHz 25 C 2.5 GHz
85 C 2.7 GHz
2
25 C 2.7 GHz -30 C 2.7 GHz
1.5
1
0.5
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
0 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Pout (dBm)
Pout (dBm)
Gain Vs Pout Vs Freuqency
15 14 13 12 11 10
15 14 13 12 11 10 9
Gain Vs Pout Vs Temperature
Gain (dB)
Gain (dB)
9 8 7 6 5 4 3 2 1 0 10 12 14 16 18 20 22 24 26 28 30 32
25 C 2.7 GHz 25 C 2.6 GHz 25 C 2.5 GHz
8 7 6 5 4 3 2 1 0 10 12 14 16 18 20 22 24
85 C 2.7 GHz 25 C 2.7 GHz -30 C 2.7 GHz
26
28
30
32
Pout (dBm)
Pout (dBm)
S21
15.00 13.00 11.00 9.00 7.00 5.00 3.00
-5.00 0.00 5.00
S11 and S22
Return Loss (dB)
Gain (dB)
-10.00
1.00 -1.00 -3.00 -5.00 -7.00 -9.00 -11.00 -13.00 -15.00 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9
-15.00
S11
S22
-20.00
-25.00
-30.00 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 1.9 2.1 2.3 2.5 2.7 2.9 3.1 3.3 3.5 3.7 3.9
Frequency (GHz)
Frequency (GHz)
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
2.5 GHz InGaP HBT 5W Linear Power Amplifier
May 2006 - Rev 24-May-06
CHV2710-QJ
Recommended Board Schematic
Port VCONTROL C C11 C=10 nF C C5 C=10 nF TLIN TL6 Z=60 Ohm E=90 TLIN TL3 Z=60 Ohm E=85 C C3 C=1.6 pF C C6 C=100 uF Port VCC
TLIN TL1 Z=50 Ohm E=28 C C1 C=6.8 pF Port RFOUT
Port RFIN
TLIN TL5 Z=50 Ohm E=40
C C10 C=2.2 pF
C C9 C=4.7 pF
TLIN TL2 Z=18 Ohm E=30 TLIN TL4 Z=60 Ohm E=85
C C4 C=1.6 pF
C C2 C=1.5 pF
C C8 C=10 nF
C C7 C=100 uF
Port VCC_
Recommended Board Layout
12 mil RO4003
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
2.5 GHz InGaP HBT 5W Linear Power Amplifier
May 2006 - Rev 24-May-06
CHV2710-QJ
Recommended Board Layout:
We recommend that all N/C pins be grounded and sufficient number of vias to be present under the ground plane. Pins 13 and 18 are connected to the RFout trace.
Physical Dimensions:
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 4 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
2.5 GHz InGaP HBT 5W Linear Power Amplifier
May 2006 - Rev 24-May-06
CHV2710-QJ
Pin Assignment:
Functional Block Diagram:
Pin #
1 4 14 15 16 17 2, 3, 5, 6, 7, 8, 9, 10, 11, 12 13, 18, 19, 20, 21, 22, 23, 24
Description
Vcontrol RF IN RF OUT 4 RF OUT 3 RF OUT 2 RF OUT 1 N/C
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 5 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.
2.5 GHz InGaP HBT 5W Linear Power Amplifier
May 2006 - Rev 24-May-06
CHV2710-QJ Handling and Assembly Information
CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ESD - Gallium Arsenide (GaAs) devices are susceptible to electrostatic and mechanical damage. Die are supplied in antistatic containers, which should be opened in cleanroom conditions at an appropriately grounded antistatic workstation. Devices need careful handling using correctly designed collets, vacuum pickups or, with care, sharp tweezers.
Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental
requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matt tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260C reflow) "Pb Free" processes. For those customers not making the change at this time, Mimix will maintain production of current configurations. For questions and comments e-mail: ourearth@mimixbroadband.com.
Ordering Information
Part Number for Ordering CHV2710-QJ-0G00 CHV2710-QJ-0G0T PB-CHV2710-0000 Package Matte Tin plated RoHs compliant 6X6 QFN surface mount package in bulk Matte Tin Plated RoHs compliant 6X6 QFN surface mount package in tape and reel Evaluation Board with SMA connectors
We also offer the plastic package with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 6 of 6
Characteristic Data and Specifications are subject to change without notice. (c)2006 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.


▲Up To Search▲   

 
Price & Availability of CHV2710-QJ

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X